1. Fire-tube boilers mostly burn solid fuels, but readily adaptable to those of the liquid or gas variety.
2. Superheated steam presents unique safety concerns because, if there a leak in the steam piping, steam at such high pressure/temperature can cause serious, instantaneous harm to anyone entering its flow.
3. Safety was the main concern behind Benson’s concept. Earlier steam generators were for relatively low pressures of up to about 100 bar, corresponding to the state of the art in steam turbine development at the time.
4. In standard versions, movable grate and blowdown connection for water pumping and emptying is located the right side of the boiler.
5. The boiler of a steam generator and various auxiliary systems built into the boiler or around it, participating in the process of steam production.
6. Fresh steam the steam turbine through stop and control valves and expands through a group of high pressure stages.
7.The stator core consists of insulated magnetic laminations arranged in segments separated ventilating ducts and tightened elastically inside the stator frame.
8. The low voltage auxiliary and general power supply switchgear consists main distribution panels and sub-distribution panels.
9. An important property of a useful fuel is that its energy can be stored be released only when needed, and that the release is controlled in such a way that the energy can be harnessed to produce work.
10. A pump moves liquids or gases from lower pressure to higher pressure, and overcomes this difference in pressure by adding energy to the system (such a water system).